AirGap 120/5
For ordering:
Send an e-mail to info@radonett.se
Please specify the product you are interested in and your contact information, including: Delivery and invoice information
Product specification
AirGap 120/5 back flow preventer category 5 type AB is type approved according to SS-EN 1717. Has double pums for extra safety and redundancy. Installation is quick and easy. The model is floor-standing or wall-mounted and requires minimal space.
The backflow preventer is based on our radon separator design, which is currently used in 7 countries and has been tested for more than 200 million operating hours!
Radonett AirGap 120/5 is delivered as a complete unit tested in the factory before delivery. Pre-mounted 3-phase pumps (internal), damped design solenoid valve, pressure impact absorbers, adjustment valve, adjusted electrical switch with control board operation of the assembled pump. Internally mounted stainless steel pump provides low noise and protection against aggressive ambient environment.
- Working pressure: 120 l/min at 5 Bar
- Max pressure out: 6,2 Bar
- Max flow out: 240 l/min
- Weight (empty): 73 kg
- Height: 1 030 mm
- Width: 670 mm
- Depth: 330 mm
- Volume: 170 liter
- Tank in acid-proof sheet metal: EN 1.4404
- Water in: Solenoid valve Bürkert 5282 NC R20, 3/4″, hammer damped
- Water out: Adjustment valve pre-mounted R25, 1 1/4″ internal
- Control box: Radonett
- Frequency controll: Optional: Vacon
- Alarm: Overflow and pump alarm
- Dry running protection: yes
- Pump (internal): 2 x 1100 W
- Balancing valve: yes
- Pressure switch: Telemecanique
- Power: 3 x 400 V
- Rated current: 6,2 A
- Installation: On the floor in premises with floor drain and non-freezing environment.
Contact Radonett for more information and for installation manual
