Select Page

AirGap 150/10

 

AirGap 250/6 back flow preventer category 5 type AB is type approved according to SS-EN 1717. The installation is swift and simple. It can be placed on the floorl and uses a minimal amount of space.

Radonett AirGap 150/10 is delivered as a complete unit tested in the factory before delivery. Pre-mounted 3-phase pump damped design solenoid valve, pressure impact absorbers, adjustment valve, adjusted electrical switch with frequency controlled  operation of the unit.

Specification:

  • Working pressure: 150 l/min at 10 Bar
  • Max pressure out: 12,5 Bar
  • Max flow out: 215 l/min
  • Weight (empty): 175 kg
  • Height: 1 150 mm
  • Width: 900 mm
  • Depth: 600 mm
  • Volume: 420 l
  • Tank in acid-proof stain-less steel: EN 1.4404
  • Water in: Solenoid valve Bürkert 5282 NC R20, 3/4″, hammer damped
  • Water out: Adjustment valve pre-mounted R32, 1 1/4″ internal
  • Frequency controll:  Vacon
  • Alarm: Overflow and pump alarm
  • Dry running protection: yes
  • Pump : 4 kW, (3-phase)
  • Balancing valve: yes
  • Pressure sensor: Danfoss 0-16 Bar
  • Power: 3 x 400 V
  • Rated current: 7,4 A
  • Installation: On the floor in premises with floor drain and non-freezing environment.

Product leaflet

Download PDF

Contact Radonett for more information and for installation manual

 
AirGap 150/10 återströmningsskydd, brutet vatten, SS-EN 1717, airgap

Back flow preventers:

AirGap 60/5

AirGap 60/5

Back flow preventer category 5 type AB is type approved according to SS-EN 1717.

read more
AirGap 75/5

AirGap 75/5

Back flow preventer category 5 type AB is fitted with double pumps for extra safety and redundancy!

read more
AirGap 120/5

AirGap 120/5

Backflow preventer category 5 type AB with double pumps for extra safety and redundancy!

read more
AirGap 150/5

AirGap 150/5

Back flow preventer category 5 type AB with double pumps for extra safety and redundancy!

read more