AirGap 150/5 corner modell

Corner placed AirGap 120/5 back flow preventer category 5 type AB is type approved according to SS-EN 1717. The installation is swift and simple. It can be placed on the floor or on the wall and uses a minimal amount of space.

Radonett AirGap 150/5 is delivered as a complete unit tested in the factory before delivery. Two pre mounted 3-phase pumps (internal), damped design solenoid valve, pressure impact absorbers, adjustment valve, tuned pressure switch and control board-operation of the assembled pumps. Internally assembled stainless-steel pump leads to a low sound level and protects the pump from the aggressive environment

Specification:

Working pressure: 150 l/min at 5 Bar
Max pressure out: 7,4 Bar
Max flow out: 240 l/min
Weight (empty): 75 kg
Height: 1 170 mm
Wall side 1: 495 mm
Wall side 2: 450 mm
Volume: 128 l
Tank in acid-proof stain-less steel: EN 1.4404
Water in: Solenoid valve Bürkert 5282 NC R20, 1″, hammer damped
Water out: Adjustment valve pre-mounted R25, 1 1/4″ internal
Controll board: Radonett
Frequency controll: Optional: Vacon
Alarm: Overflow and pump alarm
Dry running protection: yes
Pump (internal): 2 x 1,5 kW, (3-phase)
Balancing valve: yes
Pressure sensor: Danfoss
Power: 3 x 400 V
Rated current: 7 A
Installation: On the floor or on the wall in premises with floor drain and non-freezing environment.